MITSUBISHI TRITON TRUE SUSPENSION LIFT KIT 9€INCH

Mitsubishi Triton Strada, L200, Warrior, Sportero, Hunter
TRUE SUSPENSION LIFT KIT 4-9” inches
GAIN REAL GROUND CLEARANCE / 4" FRONT + 4-9" BACK

DAYTONA-CPS 2005-2016

4" (= approx. 100mm) FRONT
+
4-9" (= approx. 230mm) REAR [ Adjustable see NOTE BELOW]

COMBO SUSPENSION LIFT KIT
for Mitsubishi Triton 2005-2016
FITS ALL NEW Mitsubishi Triton MODELS
FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB

Lifts your Mitsubishi Triton to allow for more ground clearance and bigger tires!

Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.

Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS

Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance.
Body lifts kits lead to the following problems:
Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.

Our DAYTONA-CPS suspension lift kit offers you clear performance advantages
by spacing down your vehicles factory suspension.
This way you will get:
- Enhanced looks
- Increased tire clearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities

Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:

- 2 x coil spacers
CNC-manufactured – for 4” front lift**

- 2 x 9"-10" Rear Shackle Lift Leveler -ADJUSTABLE
manufactured from heavy duty S235JR construction steel with antirust coating
- 2 x 4" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with antirust coating

- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy
- All required nuts and fasteners
- Detailed English PDF Picture Diagram installation instructions .
** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length. Front 4" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 4 inches (100mm) front / 4-9 inches up to 230mm back).
This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. Shackle lifts are typically measured in halves. Meaning a 10" taller shackle produces 5" of actual lift. This is because only one end of the spring is being lifted. Shackles do change steering caster and drive-line angles, Plus the 4" axel blocks CAN PRODUCE 4" from Blocks and+5" which is 1/2 of the Shackle =9 total inches , This is NOT A FIRM number, many variations may make it less due to age of springs, and loading,
NOTE :--- You will have to adjust the Brake fee line in the rear as the original line is only good for max 4 inch lift, Shocks may need add shock extensions if off road driving, however they may fit but would have restricted travel , Axel Pinion angle will need adjustment with Axel shims,
THIS IS A KIT WHICH WILL NEED CUSTOM WORK TO YOUR TRUCK
Axle Shims for Rear Pinion angle adjustment [ NOT SUPPLIED] available at the drive line alignment shops are these steel shims are designed to change your pinion or caster angle on a leaf spring suspended vehicle and a requirement during the professional alignment that’s is recommended.
Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together for you!
The Mitsubishi Triton is a compact pickup truck produced by Mitsubishi Motors. (2005–2016) Triton was unveiled in 2005. Designed by Akinori Nakanishi, it is built exclusively by Mitsubishis subsidiary in Thailand and is exported to 140 global markets.[2] It is mostly known as L200 except for Japan and its subsidiary countries markets. The car has a 2.5 litre turbodiesel engine developing 134 hp or 180 hp. Also called Mitsubishi L200, Mitsubishi Triton (Australia), Mitsubishi Strada, Mitsubishi Warrior, Mitsubishi Sportero, Mitsubishi Hunter (Israel).

THIS includes Shipment by DHL EXPRESS from Factory, please provide details of your address and email address .

Payment is by LBC or Western Union or Bank.
Shipment is NEXT business day with DHL Tracking Number given for easy tracking in 24 hours.

Remember send us your email address
We will send you full instructions and pictures and description

www.daytona-cps.com

Dealer franchise available, inquire now for your Own Protected Area
Lift Kits
Wheel Flair Kits
LED Lights