ARDUINO PRO MINI ATMEGA328 DEEK ROBOT

Think it... Make it... Invent!

SKU: PROD0004

The Arduino Pro Mini is a microcontroller board based on the ATmega328, intended for advanced users who require flexibility, low-cost, and small size. Manufactured by Deek-Robot

The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 ****og inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

reference: Arduino

The Deek-Robot Pro Mini is nearly identical to the Sparkfun Arduino Pro Mini. It has all of the I/O of the Arduino Uno, plus two more ****og inputs. There is only a 5V version of the board. The “”extra”” I/O is at the end opposite the programming connector. This is slightly different than the Sparkfun Arduino Pro Mini boards, which have the ****og pins in an unhandy position in the interior of the board. Either way, you can’t put pins in them and use them on a breadboard (the pins would need to point up). With the Deek-Robot Pro Mini, the extra pins at the end are at least on the same 0.1?” centers as the rest of the connectors, even though A4 and A5 are off by 0.05?”.

You will find boards that say “”Deek””, or “”Deek_robot””, or “”Deek Robot””. They are fakes. “”Deek-Robot”” is the logo on the boards.

reference: Arduino-Board.com

PACKAGE INCLUDES:

1 x Arduino PRO MINI (328P/5V/16MHz)

Dimensions (mm) 33x18x3.2
Weight (g)