PHP 300.00 16CH A N A L O G DIGITAL MUX BREAKOUT BOARD CD74HC4067

16CH A N A L O G Digital MUX Breakout Board CD74HC4067 Precise module Arduino

Description:
This is a breakout board for the very handy 16-Channel a n a l o g/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch - it internally routes the common pin
(COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx).
It works with both digital and a n a l o g signals (the voltage can't be higher than VCC),
and the connections function in either direction.
To control it, connect 4 digital outputs to the chip's address select pins (S0-S3),
and send it the binary address of the channel you want (see the datasheet for details).
This allows you to connect up to 16 sensors to your system using only 5 pins!

Since the mux/demux also works with digital signals,
you can use it to pipe TTL-level serial data to or from multiple devices.
For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller.
You can then select any one of those 16 devices to listen to.
If you want two-way communications, you can add a second board to route
your microcontroller's TX line to 16 device's RX lines.
By using multiple boards, you can create similar arrangements for I2C, SPI, etc.
The internal switches are bidirectional, support voltages between ground and VCC,
have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching.
The board also breaks out the chipâ's “enable” pin, which when driven high,
will completely disconnect the common pin (all switches “off”).

Features:
1.2V to 6V operation
2.“On” resistance: 70 Ohms @ 4.5V
3.6ns break-before-make @ 4.5V
4.Wide operating temperature range: -55C to 125C


Package Included:
1 x 16CH a n a l o g Digital MUX Breakout Board CD74HC4067 Precise Compatible Arduino



SERIOUS BUYERS ONLY PLEASE

Contact number: 09333-888-611

Do payment first before your item would be shipped on that schedule date. No COD option.

Mode of payment is either thru GCASH, BPI, LBC or PALAWAN Express, PAYPAL(+4.5%+15), Cash for meetups.

Provincial buyers, you pay for the added shipping cost:
Via LBC: 175.00 (Visayas) or 180.00 (Metro Manila) or 185.00 (Luzon/Mindanao) + 5php insurance for every 500 declared value.

Via JRS: 99.00 (Visayas) or 114.00 (Luzon/Mindanao)

Schedule for sending parcels is M-W-F ONLY. Payments should be received in the morning of MWF if you want your item to be shipped on that scheduled day. As I leave by lunch to send out of town orders already. Otherwise, it would be on the next schedule date. Thanks!





blakicez
Complete ads list at goo.gl/VWNeyz