MILLERMATIC 190, MIG, MILLER

Auto-Setâ„¢ automatically provides the right
settings to weld mild steel while infinite voltage
control allows the flexibility to manually set
your own parameters.
• Set the wire diameter, a blue light shows
Auto-Set is activated
• Dial in the thickness of what you’re welding
• Start welding with the exact parameters
you need!



Miller inverter technology combines
best-in-class arc characteristics with the
portability of a 35-pound machine. The arc is
extremely forgiving to variations in arc length
and travel speeds.

Angled cast-aluminum drive system with
calibrated tension knob creates consistent feeding
and easy setup for up to 15-foot MIG guns.
Quick Selectâ„¢ drive roll makes setup quicker
by offering three grooves — two for different
size solid wire and a third for flux-cored wire.
Auto Spoolgun Detectâ„¢ automatically detects
when a MIG gun or spool gun is connected
eliminating the need for a switch.
Fan-On-Demandâ„¢ power source cooling system
operates only when needed, reducing noise,
energy use and the amount of contaminants
pulled though the machine.
Smooth-Startâ„¢ provides a smooth, spatter-free
start. It’s the best-starting machine in the small
MIG machine category.

Thermal overload protection shuts down unit
and activates the over temperature light if
airflow is blocked or duty cycle is exceeded.
Automatically resets when unit cools.
Uses 4- or 8-inch (102 or 203 mm) spools
and can be set up to weld with .024 –.035 inch
(0.6 – 0.9 mm) solid wire and .030 –.045 inch
(0.8 – 1.2 mm) flux-cored wire.