32×32 RGB LED MATRIX PANEL – 5MM PITCH

32×32 RGB LED Matrix Panel – 5mm Pitch
Bring a little bit of Times Square into your home with this sweet 32×32 RGB LED Matrix Panel. These panels are normally used to make video walls.

The LEDs on this panel are also a little closer together (a 5mm grid) so you won’t have to stand as far away to appreciate it. They are made to look good indoors, even with a wide-angle view (160 degrees) and look great in ******t light.

These matrices have 1024 bright RGB LEDs arranged in a 32×32 grid on the front. On the back there is a PCB with two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.

These displays are technically ‘chainable’ – connect one output to the next input – but our Arduino example code does not support this (yet). It requires a high speed processor and more RAM than the Arduino has!

These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. Please check out our tutorial for more details!
Comes with:

A single 32×32 RGB Led matrix panel ,
An IDC cable
A power cable
We also include 4 mounting screws and mini-magnets (it appears these are often mounted on a magnetic base).