HC06 BLUETOOTH MODULE ARDUINO

HC06 Bluetooth Module Wireless Serial HC-06 Bluetooth Module

Product Description:
100% Brand New.
Note:It's HC-06 Bluetooth module
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0
Operating voltage: 3.3V
Input voltage: 3.3~6V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Item size: about 37.5* 15.5mm

Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC,GND,TXD,RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with Bluetooth master module",slave module"or master-slave(whole) module.

Note:
input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply perversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse" ; when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function "


Connection Type:
VCC: Positive power supply,
GND: Negative power supply
RXD: Receiving end
TXD: Sending end