GORE® JOINT SEALANT - 1/8" CROSS SECTION X 100 FT. LENGTH

PRE-ORDER.
Gore, USA
•GORE® Joint Sealant, the original form-in-place gasket, is the most cost-effective alternative to sheet gasketing for large equipment flanges.
•GORE® Joint Sealant can be used in practically every type of sealing application, and it is ideal for sealing complex surfaces and rough or pitted flanges.
•GORE® Joint Sealant minimizes leak potential, lost production, maintenance time, and risk of catastrophic failure. It is the most reliable means of optimizing long-term system performance.
•Material: Gore® PTFE
•Type: Joint Sealant
•Size: 1/8"
•Feet per Spool: 100 Ft.
•Material 100% expanded PTFE (polytetrafluoroethylene), with monodirectional strength
This product is supplied with an adhesive backer only to aide in the product installation
•Temperature Range -269°C to +315°C (-452°F to +600°F)
•Chemical Resistance Chemical resistance to all media pH 0-14, except molten alkali metals and elemental fluorine.
•Operating Range The maximum applicable pressure and temperature depend mainly on the equipment and installation.
•Typical use: -60°C to 150°C (-76°F to 300°F); industrial full vacuum(1) to 10 bar (145 psi)
•For higher pressures, please contact us.
•Shelf Life ePTFE is not subject to aging and can be stored indefinitely. To ensure optimal adhesive function, we recommend use within two years of date of purchase when stored under normal(2) conditions.
(1) absolute pressure of 1 mmHg(Torr) = 133 Pa = 1.33 mbar = 0.019 psi
(2) 21°C (70°F) 50% Relative Humidity