PH REDUCER DRY ACID PAIL 5KG MADE IN USA

ALSO AVAILABLE IN SACK (25KG)

HIGHLIGHTS:
Safer and less corrosive than muriatic acid
No spills, fumes and dangerous splashes
Easy storage and application: Granules
Fewer regulations
No special equipment needed
Less damage to poolside accessories
Low/Acidic pH - Typically partnered with Cal-Hypo (70% Chlorine) to increase pH
Contains 91.5% - 95.2% sodium bisulfate

USES:
Reduce alkalinity and pH in swimming pools and water treatment
Acidifier and cleaning agent

HOW TO USE:
1. Pre-dissolve the dry acid first by adding the dry acid into a bucket of water
2. Once dissolved, pour the acid solution into the deep end of the pool, away from the skimmer and fixtures.
3. Retest the pH of the water after 4 hours, and add more dry acid if needed.

NOTE:
Dosage: 150g / 10,000L of pool water
Acid should be added when pump is running
Never add dry acid more than 3 times a day
ALWAYS test first Total Alkalinity before adjusting pH

HANDLING & STORAGE:
Store in cool, dry, well-ventilated place.
Keep container tightly sealed
Keep away from incompatibles (moisture and strong alkalis)

HAZARDS:
Corrosive
May cause serious eye irritation

First-Aid Measures
INHALATION: Move person into fresh air. Seek medical attention if discomfort continues.
INGESTION: Provide rest, warmth and fresh air. Immediately rinse mouth and drink plenty of water (200 - 300 mL). Seek medical attention if discomfort continues.
SKIN CONTACT: Remove contaminated clothing immediately, and wash skin with soap and water. Seek medical attention if discomfort continues.
EYE CONTACT: Hold eye open and gently wash with water for 15 - 20 minutes. Remove any contact lenses. Seek medical attention if discomfort continues.


FOR MORE INFO, CONTACT US:
Globe: 0906 - 009 - 9100
Direct Line: 897 - 0696
Email: [email protected]
Website: alliedsalesph.com