12PCS RGB LED MATRIX PANEL - 32X64 WITH DRIVER AND POWER SUPPLY

A 32x64 LED matrix, that's 2048 LEDs on a 10" x 5" board.
Thanks to an IDC connector and a seamless frame, these panels can be daisy-chained together to form even bigger LED displays.

These panels require a regulated 5V supply for power which needs to be able to source a good amount of current – up to 4A in the worst case. Included with each panel is a 0.15" pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you've come to the right place.

2048 RGB LEDs
1/16 Scan Rate
IDC Connector for Daisy Chaining
5V Supply Voltage

With a RGB LED Matrix Panel Drive Board For Raspberry Pi.
Based on the active adapter board of hzeller RPI matrix git project, full compatible and extra functions added.
Support up to three port output to drive, P0, P1 and P2 (HUB75).
Support Raspberry Pi 2 and 3, most pins used for matrix driving.
Support E-line select pins.
On board four logic buffer 74HCT245
Extra on board RTC DS1307 via IIC interface, can not be used on same time with P3 port, select by switch.
Extra on board AT24C256 EEPROM, 256K memory on alternative IIC 25 and 26 pins. Raspberry PI 3 can NOT support alternative IIC interface, so can only be used Raspberry Pi 2.
Full compatible with original board, but only can provide technical support for our type of panels, you can find matrix panel here.
Package does NOT include the CR1220 battery.

Power Supply
R-200-5
AC INPUT: 110/220V ± 15%
DC OUTPUT: 5V 40A

Includes:
12- 32x64 RGB LED Panel
6- 4mm Pitch 4-pin Power Cable w/ Spade Connectors
12- 16-pin (2x8) Ribbon Cables
2- RGB LED Matrix Panel Drive Board For Raspberry Pi
1- POWER SUPPLY